Bar End Shifter – ADVENT 1×9
Bar end shifters are the simplest, most reliable way to shift on a drop bar bike. With adjustable shifting tension, few moving parts, and the ability to switch the rear shifter to friction mode, these shifters deliver unprecedented reliability, adjustability, and flexibility in case of mechanical issues. Perfect for touring every corner of planet Earth or riding around with your friends. Or both!
Features.
- Precision machined aluminum
- Innovative torque bolt allows shift effort to be adjusted
- Shifter for rear derailleur can be switched from index to friction mode
Group | ADVENT |
---|---|
Shifter Style | Bar End Shifter |
Speed | 9-Speed |
Side | Right |
Right Shifter | Index / Friction |
Compatibility | ADVENT |
Support
WARRANTY
POLICY
microSHIFT warrantees all its products to be free from defect in material and workmanship for four years from the original date of purchase.
HOW TO MAKE A CLAIM
United States
China
Verify that your b-tension screw is adjusted properly. The adjustment should allow for an 11-13mm gap for Acolyte/Advent and a 15-17mm gap for Advent X between the guide pulley and largest cog of the cassette. If that adjustment cannot be made, there is a good chance that your chain is too long.  Most derailleur cages are eccentric.  As the cage is pulled towards the chainring, the guide pulley is then moved out of the way of the larger cogs of the cassette. Too much slack in the chain will allow the guide pulley to rest on the largest cog.
Remove the clutch cover with a Phillips head screwdriver. Tighten the clutch bolt with a T15 torx at quarter turn increments. This will add pressure to the friction washers and strengthen the clutch. Clutch strength can be tested by hand throughout the process.