ADVENT X G-Series 10 Speed Cassette 11-48
Sometimes less is more. With 10-speeds, 11-48t range and evenly spaced gear steps, the ADVENT X cassette allows riders to shift less often to find the right gear, while still having enough range to ride what they want. Fewer cogs also means less weight, a wider chain for better mud shedding — it even fits on standard 10-speed freehub bodies so you don’t need to buy new wheels for no reason. In short, it’s everything you want in a high end drivetrain.
Features.
- Compatible with standard HG cassette hub bodies
- Continuosly molded cogs achieve a high standard of durability and straightness
- Spider carrier reduces wear on aluminum cassette hub bodies
Group | ADVENT X |
---|---|
Speed | 10-Speed |
Range | 11-48T |
Surface Finish | 2 Layered ED Black |
Combination | 11-13-15-18-21-24-28-34-40*-48* |
Spider | Yes |
Cog Material | Steel / *Aluminum |
Hub Compatibility | Standard HG Freehub |
Weight | 424g |
Support
WARRANTY
POLICY
microSHIFT warrantees all its products to be free from defect in material and workmanship for four years from the original date of purchase.
HOW TO MAKE A CLAIM
United States
China
Verify that your b-tension screw is adjusted properly. The adjustment should allow for an 11-13mm gap for Acolyte/Advent and a 15-17mm gap for Advent X between the guide pulley and largest cog of the cassette. If that adjustment cannot be made, there is a good chance that your chain is too long. Most derailleur cages are eccentric. As the cage is pulled towards the chainring, the guide pulley is then moved out of the way of the larger cogs of the cassette. Too much slack in the chain will allow the guide pulley to rest on the largest cog.
If jockey wheels or other service parts are not available in your area, please contact service@microshift.com and we’ll do our best to help.
Remove the clutch cover with a Phillips head screwdriver. Tighten the clutch bolt with a T15 torx at quarter turn increments. This will add pressure to the friction washers and strengthen the clutch. Clutch strength can be tested by hand throughout the process.