ADVENT Super Short Cage Clutch Rear Derailleur
The Super Short version of our acclaimed ADVENT derailleur has all the same features as its larger counterpart, but with a small enough cage to fit on a 20″ wheeled bike. The ratchet-and-pawl clutch and return spring tension have been finely tuned to offset the smaller cage and lighter chain, allowing the derailleur to deliver fast, accurate shifts with a light feel. The fully metal body resists damage and provides extra rigidity, delivering big performance in a small package.
Features.
- Reliable ratchet-and-pawl clutch is easily adjustable and repairable
- Direct path cable routing for smooth and responsive shifting
- Compatible with 11-34T through 11-38T 9-speed cassettes
- Compatible with ADVENT shifters only
Group | ADVENT |
---|---|
Speed | 9-Speed |
Cage Length | Super Short Cage |
Max Cog | 34-38T |
Capacity | 27T |
Clutch | Yes |
Cage Material | Steel |
Outer Link Material | Aluminum |
Compatibility | ADVENT |
Support
WARRANTY
POLICY
microSHIFT warrantees all its products to be free from defect in material and workmanship for four years from the original date of purchase.
HOW TO MAKE A CLAIM
United States
China
Verify that your b-tension screw is adjusted properly. The adjustment should allow for an 11-13mm gap for Acolyte/Advent and a 15-17mm gap for Advent X between the guide pulley and largest cog of the cassette. If that adjustment cannot be made, there is a good chance that your chain is too long.  Most derailleur cages are eccentric.  As the cage is pulled towards the chainring, the guide pulley is then moved out of the way of the larger cogs of the cassette. Too much slack in the chain will allow the guide pulley to rest on the largest cog.
Remove the clutch cover with a Phillips head screwdriver. Tighten the clutch bolt with a T15 torx at quarter turn increments. This will add pressure to the friction washers and strengthen the clutch. Clutch strength can be tested by hand throughout the process.