ADVENT Left Drop Bar Intergrated Dropper Lever
You shouldn’t have to choose between drop bars and a dropper post. The ADVENT dropper remote is perfect for adventures that need both. Packaged as a single drop bar shift lever with only one paddle, the ADVENT dropper remote is compatible with droppers that route the cable from the shifter to the post (KS, Trans-X, etc.).
Features.
- External dropper cable routing, internal brake routing
- Matches aesthetics of ADVENT 9 speed drop bar shifters
Group | ADVENT |
---|---|
Shifter Style | Integrated Drop Bar |
Speed | N/A |
Side | Left |
Left Side | Brake Lever Only |
Cable Routing | External |
Brake Reach | Standard |
Lever Material | Aluminum / Steel |
Compatibility | Cable Head at Remote |
Support
WARRANTY
POLICY
microSHIFT warrantees all its products to be free from defect in material and workmanship for four years from the original date of purchase.
HOW TO MAKE A CLAIM
United States
China
Verify that your b-tension screw is adjusted properly. The adjustment should allow for an 11-13mm gap for Acolyte/Advent and a 15-17mm gap for Advent X between the guide pulley and largest cog of the cassette. If that adjustment cannot be made, there is a good chance that your chain is too long.  Most derailleur cages are eccentric.  As the cage is pulled towards the chainring, the guide pulley is then moved out of the way of the larger cogs of the cassette. Too much slack in the chain will allow the guide pulley to rest on the largest cog.
Remove the clutch cover with a Phillips head screwdriver. Tighten the clutch bolt with a T15 torx at quarter turn increments. This will add pressure to the friction washers and strengthen the clutch. Clutch strength can be tested by hand throughout the process.