ADVENT Drop Bar Shifters 1×9
For adventures that need drop bars and wide gear ranges, ADVENT 1×9 drop bar shifters are just the ticket. Compatible with ADVENT rear derailleurs and 9-speed wide range cassettes, these shifters offer all the advantages of a bombproof 9-speed setup combined with modernized gear range to help you ride everywhere you want.
Features.
- External shifter cable routing, internal brake routing
- Left side brake only for 1×9 setups
- Shifter levers are separated from brake lever to avoid accidental braking
- Crisp and positive shifting action
- Compatible with ADVENT derailleurs only
Group | ADVENT |
---|---|
Shifter Style | Integrated Drop Bar |
Speed | 9-Speed |
Side | Pair |
Left Side | Brake Lever Only |
Cable Routing | External |
Brake Reach | Standard |
Lever Material | Aluminum / Steel |
Compatibility | ADVENT |
Support
WARRANTY
POLICY
microSHIFT warrantees all its products to be free from defect in material and workmanship for four years from the original date of purchase.
HOW TO MAKE A CLAIM
United States
China
Verify that your b-tension screw is adjusted properly. The adjustment should allow for an 11-13mm gap for Acolyte/Advent and a 15-17mm gap for Advent X between the guide pulley and largest cog of the cassette. If that adjustment cannot be made, there is a good chance that your chain is too long.  Most derailleur cages are eccentric.  As the cage is pulled towards the chainring, the guide pulley is then moved out of the way of the larger cogs of the cassette. Too much slack in the chain will allow the guide pulley to rest on the largest cog.
Remove the clutch cover with a Phillips head screwdriver. Tighten the clutch bolt with a T15 torx at quarter turn increments. This will add pressure to the friction washers and strengthen the clutch. Clutch strength can be tested by hand throughout the process.