ADVENT X Trail Trigger Pro Shifter 1×10

SL-M9605-R

ADVENT X Trail Trigger Pro Shifter 1×10

On the trail, the goal is to think about your shifting as little as possible. Trail Trigger shifters feature millimeter-perfect ergonomics to put the shift levers exactly where you want them, giving you quick thumb access without compromising your grip over rough terrain. Light lever action is paired with super positive indexing to make sure you never miss a shift.

Features.

Compatible with microSHIFT ADVENT X rear derailleur
Internal cartridge bearings allow for light lever throw and positive actuation under load
Silicon traction pad provides superior traction in all conditions
Precise ergonomics put the shift lever where you want them
Not compatible with Shimano or SRAM

Group	ADVENT X
Shifter Style	Trail Trigger Pro
Speed	10-Speed
Side	Right
Lever Pad	Silicone Pad
Lever Bearing	Yes
Gear Indicator	No
Clamp Material	Aluminum
Compatibility	ADVENT X
Weight	120g

Show Full Specs

Support

WARRANTY

POLICY

microSHIFT warrantees all its products to be free from defect in material and workmanship for four years from the original date of purchase.

HOW TO MAKE A CLAIM

All warranty requests must be accompanied by a photo of the affected product and an image of the retail purchase receipt if applicable. Please take extra care to select whether the request is coming from a retailer or a consumer and which geographic region is the request coming from. Once the form is submitted, please allow one business day for the warranty process to be initiated.

United States

Email: service@microSHIFT.com

Phone: +1 (833) 364-9838

China

WeChat: microSHIFT

Step 1 of 2

Customer Type *

Select Country *

Product Purchased as OEM or Aftermarket *

OEM
Aftermarket
I Don't Know

Contact Information

Name *

First

Last

Email *

Product Information

I can't find model number

I can't find the model number

Purchase Date

Description of the issue *

Proof of Purchase / Receipt *

Photo of the issue *

Click or drag a file to this area to upload.

Please submit a photo of the drive side of the bike including the crankset and rear derailleur, as well as a close-up picture of the problem if applicable.

Four years. We warrantee all products to be free from defect in material and workmanship for four years from the original date of purchase.

No. ADVENT X has a different cable pull than Shimano 10 speed products. ADVENT X shifters and derailleurs works best with ADVENT X.

ADVENT X is compatible with standard 10 speed cassette spacing. We suggest using a cassette with a max cog ranging between 46t and 48t. You can go smaller, but it will negatively affect shifting.

Most of the time, the spacer is stuck to the cassette lockring inside the packaging. If that’s not the case, please reach out to our service team via the contact us form.

Our derailleurs work best within their suggested max cog range. 42-46t for Acolyte and Advent. 46-48t for ADVENT X. Moving to a smaller range will work, but it will also increase the distance between your guide pulley and the cogs of your cassette. This will result in slower, sluggish shifting, and our engineers will be disappointed in you.

If you exceed the max cog specification, you can stress the system, damage your derailleur, and negatively affect shifting.

You can, but we encourage you to keep within the specified max cog range. 42t-46t for Acolyte and Advent. 46t-48t for ADVENT X.

FAQ: Installing Flat Bar Shifter Cables

If you have a microSHIFT shifter on a flat bar, this video will show you how to remove an old cable and install a new one.

You do not have to disassemble any of our shifters to replace the cable. Instructions can be found here. To summarize, using the upper shift lever, shift all the way into the highest gear (smallest cog). Remove the cable cap* (marked in red). Undo the cable fixing bolt on the derailleur. Remove old cable by pushing the cable head through the cable port. Route the new cable, narrow side first, into the cable port and out through the barrel adjuster. Make sure the cable head is fully seated.

*Some shifters may not have a cable cap; in that case the cable port sits next to the upper shift lever.

FAQ: How To Adjust Pulley Gap

This video shows you how to increase the gap between guide pulley and cassette so that the chain can smoothly travel into the larger cogs.

Verify that your b-tension screw is adjusted properly. The adjustment should allow for an 11-13mm gap for Acolyte/Advent and a 15-17mm gap for Advent X between the guide pulley and largest cog of the cassette. If that adjustment cannot be made, there is a good chance that your chain is too long.  Most derailleur cages are eccentric.  As the cage is pulled towards the chainring, the guide pulley is then moved out of the way of the larger cogs of the cassette. Too much slack in the chain will allow the guide pulley to rest on the largest cog.

We’re doing our best to make microSHIFT products available everywhere, all the time. We do our best to fulfill all orders as fast as possible, but sometimes supply does not keep up with demand. If your local distributor doesn’t carry microSHIFT, ask them to.

If jockey wheels or other service parts are not available in your area, please contact service@microshift.com and we’ll do our best to help.

Most our products use standard Shimano-style brake and shifter cables. The exception is our DS- and DN- series twist shifter, which uses a Campagnolo-style cable.

No, we work exclusively with regional distributors to sell our products.

We work with regional distributors to make products available around the world. We’re working to improve our coverage, but if you can’t find a product locally, try an online retailer.

FAQ: How To Adjust Clutch Tension

A quick explanation of how to adjust the clutch tension on a microSHIFT ADVENT or ADVENT X derailleur with a ratchet-and-pawl clutch.

Remove the clutch cover with a Phillips head screwdriver. Tighten the clutch bolt with a T15 torx at quarter turn increments. This will add pressure to the friction washers and strengthen the clutch. Clutch strength can be tested by hand throughout the process.

GROUPS

Mountain

Road

PRODUCTS

ADVENT X Trail Trigger Pro Shifter 1×10

SL-M9605-R

ADVENT X Trail Trigger Pro Shifter 1×10

Features.

Support

Trail Trigger Shifters Setup

Contact Information

Product Information

FAQ: Installing Flat Bar Shifter Cables

FAQ: How To Adjust Pulley Gap

FAQ: How To Adjust Clutch Tension

Info

Products

Help

© 2022 MICROSHIFT | AD-II ENGINEERING INC. ALL RIGHTS RESERVED

Lightweight & Modern

Designed to Survive

Progression Starts Here

Mountain

Road

How Can We Help?

Support

Resources

STORY

Product Search

This microSHIFT website uses cookies to collect informations on pages and links you visit. By clicking "Accept", you authorize microSHIFT to use these cookies.