Acolyte H-Series 8 Speed Cassette 11-38

CS-H083 11-38T

Acolyte H-Series 8 Speed Cassette 11-38

Designed specifically for our Super Short cage Acolyte derailleur, this 8-speed, 11-38T cassette provides wide range and low gears for bikes with smaller wheels. It’s built with the same precision and durability as our wider range cassettes. And yes, it works with a standard HG freehub body and a normal 8-speed chain.

Features.

Steel cogs are continuously forged for strength and shifting accuracy
Compatible with standard freehub bodies

Group	Acolyte
Speed	8-Speed
Range	11-38T
Surface Finish	ED Black
Combination	11-13-15-18-21-24-30-38
Spider	No
Cog Material	Steel
Hub Compatibility	Standard HG Freehub

Show Full Specs

Support

WARRANTY

POLICY

microSHIFT warrantees all its products to be free from defect in material and workmanship for four years from the original date of purchase.

HOW TO MAKE A CLAIM

All warranty requests must be accompanied by a photo of the affected product and an image of the retail purchase receipt if applicable. Please take extra care to select whether the request is coming from a retailer or a consumer and which geographic region is the request coming from. Once the form is submitted, please allow one business day for the warranty process to be initiated.

United States

Email: service@microSHIFT.com

Phone: +1 (833) 364-9838

China

WeChat: microSHIFT

Step 1 of 2

Customer Type *

Select Country *

Product Purchased as OEM or Aftermarket *

OEM
Aftermarket
I Don't Know

Contact Information

Name *

First

Last

Email *

Product Information

I can't find model number

I can't find the model number

Purchase Date

Description of the issue *

Proof of Purchase / Receipt *

Photo of the issue *

Click or drag a file to this area to upload.

Please submit a photo of the drive side of the bike including the crankset and rear derailleur, as well as a close-up picture of the problem if applicable.

Four years. We warrantee all products to be free from defect in material and workmanship for four years from the original date of purchase.

Our derailleurs work best within their suggested max cog range. 42-46t for Acolyte and Advent. 46-48t for ADVENT X. Moving to a smaller range will work, but it will also increase the distance between your guide pulley and the cogs of your cassette. This will result in slower, sluggish shifting, and our engineers will be disappointed in you.

If you exceed the max cog specification, you can stress the system, damage your derailleur, and negatively affect shifting.

You can, but we encourage you to keep within the specified max cog range. 42t-46t for Acolyte and Advent. 46t-48t for ADVENT X.

FAQ: How To Adjust Pulley Gap

This video shows you how to increase the gap between guide pulley and cassette so that the chain can smoothly travel into the larger cogs.

Verify that your b-tension screw is adjusted properly. The adjustment should allow for an 11-13mm gap for Acolyte/Advent and a 15-17mm gap for Advent X between the guide pulley and largest cog of the cassette. If that adjustment cannot be made, there is a good chance that your chain is too long.  Most derailleur cages are eccentric.  As the cage is pulled towards the chainring, the guide pulley is then moved out of the way of the larger cogs of the cassette. Too much slack in the chain will allow the guide pulley to rest on the largest cog.

Proper b-tension adjustment can make the shifts into the larger cogs easier. When set properly the distance between the Acolyte derailleur’s guide pulley and largest cog of the cassette should be 11-13mm. The b-tension screw is located above the limit screws near the derailleur hanger.

Standard Acolyte works well with most 24” wheels. Check to make sure the rear wheel has a standard HG freehub and not a freewheel.

We’re doing our best to make microSHIFT products available everywhere, all the time. We do our best to fulfill all orders as fast as possible, but sometimes supply does not keep up with demand. If your local distributor doesn’t carry microSHIFT, ask them to.

No, we work exclusively with regional distributors to sell our products.

We work with regional distributors to make products available around the world. We’re working to improve our coverage, but if you can’t find a product locally, try an online retailer.

FAQ: How To Adjust Clutch Tension

A quick explanation of how to adjust the clutch tension on a microSHIFT ADVENT or ADVENT X derailleur with a ratchet-and-pawl clutch.

Remove the clutch cover with a Phillips head screwdriver. Tighten the clutch bolt with a T15 torx at quarter turn increments. This will add pressure to the friction washers and strengthen the clutch. Clutch strength can be tested by hand throughout the process.

Yes. Our cassette rivets are not a structural part of the cassette. They hold most of the cogs/spacers together inside the packaging and make cassette installation easier. (The cassette lockring holds everything together when installed on the freehub body).

GROUPS

Mountain

Road

PRODUCTS

Acolyte H-Series 8 Speed Cassette 11-38

CS-H083 11-38T

Acolyte H-Series 8 Speed Cassette 11-38

Features.

Support

Contact Information

Product Information

FAQ: How To Adjust Pulley Gap

FAQ: How To Adjust Clutch Tension

Info

Products

Help

© 2022 MICROSHIFT | AD-II ENGINEERING INC. ALL RIGHTS RESERVED

Lightweight & Modern

Designed to Survive

Progression Starts Here

Mountain

Road

How Can We Help?

Support

Resources

STORY

Product Search

This microSHIFT website uses cookies to collect informations on pages and links you visit. By clicking "Accept", you authorize microSHIFT to use these cookies.