Thumb Tap Shifters 3×6 – TS38
With a variety of form factors to provide you with exactly the ergonomics you want, our Thumb Tap shifters combine light shifting effort with a wide range of derailleur compatibilities. Whether you’re building a new bike or getting an old one back on the road, you can rely on these to do the job.
Features.
- Easy to read gear indicator
- Light shifting action with a positive index click
- Ergonomic thumb triggers
Shifter Style | Thumb Tap |
---|---|
Speed | 6-Speed |
Chainring Count | 3x Triple |
Bearing | No |
Gear Indicator | Yes |
Clamp Material | Composite |
Lever Material | Composite |
Compatibility | Shimano Mountain |
Support
WARRANTY
POLICY
microSHIFT warrantees all its products to be free from defect in material and workmanship for four years from the original date of purchase.
HOW TO MAKE A CLAIM
United States
China
You do not have to disassemble any of our shifters to replace the cable. Instructions can be found here. To summarize, using the upper shift lever, shift all the way into the highest gear (smallest cog). Remove the cable cap* (marked in red). Undo the cable fixing bolt on the derailleur. Remove old cable by pushing the cable head through the cable port. Route the new cable, narrow side first, into the cable port and out through the barrel adjuster. Make sure the cable head is fully seated.
*Some shifters may not have a cable cap; in that case the cable port sits next to the upper shift lever.